INSYS SCR Initial Setup

    Establish the connection

    1. Insert the SIM card (mini SIM) until it clicks into place.
    2. Connect a cellular antenna.
    3. Connect your PC to the router's ETH1 port using a network cable.
    4. Make sure that the DHCP client is activated on the PC (obtain the IP address automatically).
    5. Supply the LTE router with voltage.
    6. Open a web browser and enter the URL “http://192.168.1.1”.
    7. Enter “insys” as the user name and “icom” as the password.
    8. Start the quick start function
    9. Enter the access data for your SIM card.
      You can find the access data in the documents supplied by your network operator.

      If you are using a meteocontrol SIM card, enter the following access data:

      • Username: m2m
      • Password: sim
      • APN: m2m-net.sa.t-mobile  

    10. Run the wizard, you will then see the following overview:

    11. ETH1 and ETH2 are now configured on the same network:
      This completes the initial setup.
      You can now optionally carry out further settings, please use the operating instructions for the device.
    Published