VCOM Import - KOSTAL Piko

    How to connect your Kstal Piko inverter to the VCOM portal

    Technical details

    protocol

    http

    data file

    .dat

    reporting interval

    variable / 300 seconds (recommended)

    server

    www1.meteocontrol.de

    port

    80

    Data logger device VCOM
    • At system level, select -> Settings -> Data logger overview
    • Select Kostal and confirm your selection.
    • Enter a data logger name and the hardware serial number of the inverter.
      Leave the setting of the measurement interval at 900s.
    NOTE: The inverter normally only sends data to the VCOM portal once a day (approx. 11:00 p.m.).

    1. Connect to the web interface of the Kostal Piko inverter
      If the IP address is not known, you can also call up the web interface using the serial number (http: // [SERIENNUMMER])

    2. Enter your login information.

      Factory setting:
      Username: pvserver
      Password: pvwr  

    3. Enter the identifier "P202L" in the "Portal Code" field and confirm your entry by clicking the Apply button.



    4. Enter the words "go online" in the "Portal Code" field.


      Confirm your entry by clicking the Apply button.
      This will start a test transmission. If your inverter has already recorded yield data, these will be transferred to the VCOM portal within the next five minutes. Switch back to the inverter's start page (Info) and close the Internet browser.
    The setup of your inverter is now complete.
    Published